Tagged: 

  • This topic has 1511 replies, 2 voices, and was last updated by theachub_m40wgrTheAChub.
Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • #1535
    theachub_m40wgrTheAChub
    Keymaster

      Premium

      Hello,
      I recently got a new split system installed. I noticed on the back of the condenser, there seems to be a few fins quite bent.
      The installer did not mention anything about this and the a/c is working very well so far.
      Is this something I should be worried about? I appreciate the fins are easily bendable and it could have easily happened during transit or even install.

      Thanks in advance

      #1536
      KingACKingAC
      Participant

        Probably will not cause any trouble. The Installer can fix it or you can go to Amazon and search for “Fin Comb”.

        #1537
        theachub_m40wgrTheAChub
        Keymaster

          Premium

          Thanks for your post. I might ask the installer to take a look next year when they service it. I don’t want to damage anything having a go with the comb, I did try with a brush I have and it didn’t make much of a difference. I have a year of warranty with the installer, so if I get them back just before the year is out, they can take a look and hopefully fix it.

        • Author
          Posts
        Viewing 3 posts - 1 through 3 (of 3 total)
        • You must be logged in to reply to this topic.
        Scroll to Top