- This topic is empty.
Viewing 1 post (of 1 total)
-
Posts
-
TheAChub
Code Text Description Cause Check Procedure 6608 Communication fault between Lossnay units. Communication fault between Lossnay controllers.
When using multiple Lossnay units, the Main/Sub switch has not been set. Interference on the transmission line.
Cable length is in excess of 500m.
Transmission cable is not securely connected.
Multi core cable is being used for multiple uses and causing interference.
Isolate power and set the lead unit to Main using SW1 and the remaining units to Sub. Check and repair cable terminations.
Check the length of the transmission cable.
Check that the cable used is as specified.
6608 Communication error. Loss of voltage or noise entering the transmission line TB7. Check wiring, connections and cable size/spec.
Viewing 1 post (of 1 total)
- You must be logged in to reply to this topic.